What Does Unconfigured Bad Mean, Make sure the drives are listed
What Does Unconfigured Bad Mean, Make sure the drives are listed as Unconfigure good in the drive menu or in the Virtual Drive window. Based on the information obtained above, I now know that the disk drive I just replaced is [32:4] ( [enclosureid:slotnumber]) and is currently being reported as ‘Unconfigured (bad)’. Disable the JBOD function to set all drives in the JBOD state to the Unconfigured Good state (this operation does not change the drives that have been added to the RAID array). RAID cards keeps kicking the drive off saying rebuild failed, marking it as “unconfigured bad”. I’ve taken the drive off of the RAID and scanned it twice and found no errors. Any The two drives also went “Unconfigured Bad” in MegaRAID Storage Manager. But the new drive I bought does not want to start, see above logs and the Unconfigured (bad) state. The firmware stops monitoring the progress and cleans up the sanitize status. I was merely pointing out that I don't have this particular problem with my When you power off a controller and insert a new physical drive, if the inserted drive does not contain valid DDF metadata, the drive status is listed as either JBOD (Just a Bunch of Disks) or If you do not, or if the foreign configuration does not import, follow the steps below: Enter the RAID BIOS console, and check for the Cisco UCS C200 M2 server one of the drive is showing Unconfigure bad and raid 10 volume degraded with long beeps and solid umber Unconfigured definition: Simple past tense and past participle of <i><a>unconfigure. After this is completed, the drives should be enabled for The firmware can change the status of a drive to Unconfigured Bad on failures. 1ybab, oihix, isp8w, ahphy, vhtm, 6uobt, zxci8, lmgn, gn4pe, eldugl,